Rear Spoiler Replacement Hatchback
Removal Procedure
- Open the tail gate.
- Remove the rear spoiler from the tail gate.
Installation Procedure
Install the rear spoiler on the tail gate with the nuts.
Rear Spoiler Replacement Notchback
Removal Procedure
Warning: Refer to Battery Disconnect Warning in the Preface section.
- Disconnect the negative battery cable. Refer to
Battery Negative Cable Disconnection and Connection.
- Remove the clips and rear compartment trim.
- Disconnect the rear spoiler electrical connector.
- Remove the nuts.
- Using a flat-bladed tool, carefully separate the rear spoiler from the rear compartment lid.
- Remove the rear spoiler from the rear compartment lid.
Installation Proccedure
Note: If reusing the rear spoiler, remove any remaining double-sided tape from the rear spoiler and the rear compartment lid.
- Apply new double-sided tape.
- Peel off the adhesive backing paper and affix the rear spoiler on to the rear compartment lid, ensuring it is carefully positioned.
Caution: Refer to Fastener Caution in the Preface section.
- Install the nuts attaching the rear spoiler and tighten to
3 N·m (27 lb in).
- Install the rear compartment lid trim with the clips.
- Connect the negative battery cable.