---------- Some 1985-91 J and L cars might exhibit a condition of a "Squawk" OR "Clunk" noise from the front suspension or engine compartment area when driving over small bumps or entering parking lots (i.e. washboard road surfaces, railroad tracks).
------- The condition may be caused by the rubber bushing material bleeding through the teflon/polyester sock and coming into contact with the stabilizer bar.
----------- If this condition is encountered, replace both stabilizer bar bushings with newer designed bushings. The part numbers for the new bushings are listed below:
STABILIZER BAR DIAMETER BUSHING PART NUMBER(S) ----------------------- ---------------------- 22mm 22566673 24mm 22566674 26mm 22566675 28mm 22566676 30mm 10088389
Parts are currently available from GMSPO.
Labor Operation Number: E2147 Labor Time: See Current Labor Time Guide TROUBLE CODE: 92
General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.