GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1996 🢒 Beretta 🢒 Engine 🢒 Engine Mechanical - 2.2L 🢒 Oil Level Indicator Tube Replacement

Removal Procedure

    Object Number: 1143 Size: SH
  1. Remove the oil level indicator.
  2. Remove the oil fill tube bolt.
  3. Remove the oil fill tube.
  4. Remove the oil fill tube seal.

Installation Procedure

    Object Number: 1143 Size: SH
  1. Install the oil fill tube seal.
  2. Install the oil fill tube and bolt.

    3. Tighten
    Tighten the bolt to 50 N·m (37 lb ft).

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the oil level indicator.