COLD ENGINE/HOT ENGINE RESTART DETONATION/ROUGH IDLE

Subject: COLD ENGINE OR HOT ENGINE RESTART DETONATION OR IDLE ROUGHNESS DUE TO LEAN CONDITION

Model and Year: 1990-91 S TRUCK

Condition: Some owners of 1990 and 1991 S trucks with 2.5L engines (VIN Code E) may comment of an engine detonation or idle roughness when cold or after a hot restart.

Cause: The production calibration has a temporary lean condition when the engine is cold or after a hot restart.

Correction: New MEMCALS have been released which address this temporary lean condition. Install the correct MEMCAL from the chart below:

Trans Axle MEMCAL Model Engine P/N Code I.D. Broadcast Scanner ----- -------- --------- ---- -------- --------- ------- "S" 2.5L LN8 MAN 5 SPD 3:73 16159046 AXAA 9041 "S" 2.5L LN8 MAN 5 SPD 4:11 16159047 AXAB 9051

Parts are currently available from GMSPO.

Labor Operation Number: T0500 Labor Time: 0.7 Hours Trouble Code: 92

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.