GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1996 🢒 Blazer - 2WD 🢒 Engine 🢒 Engine Mechanical - 2.2L 🢒 Accessory Drive Tensioner Diagnosis

Inspection Procedure

    Notice: Allowing the drive belt tensioner to snap into the free position may result in damage to the tensioner.

  1. Remove the multiple ribbed drive belt. Refer to Drive Belt Replacement .
  2. Position a hex head socket on the belt tensioner pulley bolt head.
  3. Move the drive belt tensioner through it's full travel.
    4. • The movement should feel smooth.
    • There should be no binding.
    • The tensioner should return freely.
  4. If any binding is observed, replace the tensioner. Refer to Drive Belt Tensioner Replacement .
  5. Install the multiple ribbed drive belt. Refer to Drive Belt Replacement .