For 1990-2009 cars only
Removal Procedure
- Remove the door trim panel. Refer to Front Side Door Trim Panel Replacement .
- Remove the water deflector. Refer to Door Water Deflector Replacement .
- Remove the bolts that retain the front run channel to the door.
- Carefully pull the front run channel in order to disengage the run channel from the window weatherstrip.
- Remove the front run channel from the door.
- Slide the window forward.
- Remove the bolts that retain the rear run channel to the door.
- Carefully pull the front run channel in order to disengage the run channel from the window weatherstrip.
- Remove the rear run channel from the door.
Installation Procedure
- Install the rear run channel to the door.
- Install the bolts that retain the rear run channel to the door.
- Slide the window rearward into the rear run channel.
- Install the front run channel to the door.
- Install the bolts that retain the front run channel to the door.
- Install the water deflector. Refer to Door Water Deflector Replacement .
- Install the door trim panel. Refer to Front Side Door Trim Panel Replacement .
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the bolts to 10 N·m (88 lb in).
Tighten
Tighten the bolts to 10 N·m (88 lb in).
