GM Service Manual Online
For 1990-2009 cars only
Makes
›
Chevrolet
›
2000
›
Blazer - 2WD
›
Transmission/Transaxle
›
Manual Transmission - NV 3500
› Transmission Housing Oil Seal Replacement
Search
Transmission Housing Oil Seal Replacement for Chevrolet Blazer - 2WD 2000
Transmission Housing Oil Seal Replacement Rear Seal (2wd)
Tools Required
•
J 36825
Output Shaft Oil Seal Remover
•
J 23907
Slide Hammer
•
J 36502-2A
Output Shaft Seal Protector/Installer
•
J 36502
Extension Housing Seal Installer
Removal Procedure
Raise the vehicle. Refer to
Lifting and Jacking the Vehicle
in General Information.
Remove the rear propeller shaft. Refer to
Two-Piece Propeller Shaft Replacement
in Propeller Shaft.
Using
J 36825
and
J 23907
, pry the seal out of the extension housing.
Installation Procedure
Position
J 36502-2A
over the output shaft.
Using
J 36502
, install the rear output shaft seal.
Remove
J 36502-2A
from the output shaft.
Fill the space between the seal lips with grease GM P/N 1052497 or equivalent.
Install the rear propeller shaft. Refer to
Two-Piece Propeller Shaft Replacement
in Propeller Shaft.
Check the transmission oil level. Refer to
Fluid Replacement
.
Lower the vehicle.