Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you review the seat belt circuit description and perform the necessary inspections? | -- | Go to Symptoms | |
2 | Verify that the fasten safety belt indicator is always on. Does the fasten safety belt indicator operate normally? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | |
3 | Was the instrument panel cluster (IPC) system check performed? | -- | Go to Diagnostic System Check - Instrument Cluster in Instrument Panel, Gauges and Console | |
4 |
Does the seat belt lamp turn ON and OFF when commanded? | -- | Go to Fasten Safety Belt Chime Inoperative in Instrument Panel, Gauges and Console | |
5 | Replace the IPC. Refer to Instrument Cluster Replacement in Instrument Panel, Gauges and Console. Is the repair complete? | -- | -- | |
6 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK |
