GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 Blazer - 2WD 🢒 Body and Accessories 🢒 Instrument Panel, Gauges, and Console 🢒 Remote CD Changer Replacement

Remote CD Changer Replacement Envoy Only

Removal Procedure
  1. Remove the negative battery cable.
  2. Remove the floor console. Refer to Front Floor Console Replacement in Instrument Panel Gauges, and Console.

    3. Object Number: 401733 Size: SH
  3. Remove the compact disc changer cover retaining bolts.
  4. Remove the compact disc changer cover.

    5. Object Number: 401729 Size: SH
  5. Remove the compact disc changer retaining bolts.
  6. Remove the compact disc changer.
  7. Remove the console wiring harness connector from the compact disc changer.

Installation Procedure

    Object Number: 401729 Size: SH
  1. Install the console wiring harness connector to the compact disc changer.
  2. Install the compact disc changer.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the compact disc changer retaining bolts.

    4. Tighten
    Tighten the compact disc changer retaining bolts to 6 N·m (53 lb in).


    Object Number: 401733 Size: SH
  4. Install the compact disc changer cover.
  5. Install the compact disc changer cover retaining bolts.

    6. Tighten
    Tighten the compact disc changer cover retaining bolts to 1.9 N·m (17 lb in).

  6. Install the negative battery cable.

Remote CD Changer Replacement Except Envoy

Removal Procedure

    Object Number: 600931 Size: SH
  1. Remove the negative battery cable.
  2. Remove the floor console. Refer to Front Floor Console Replacement in Instrument Panel Gauges, and Console.
  3. Disconnect the console wiring harness connector to the remote compact disc changer.
  4. Remove the compact disc changer mounting nuts.
  5. Remove the compact disc changer from the mounting bracket.

Installation Procedure

    Object Number: 600931 Size: SH
  1. Install the compact disc changer to the mounting bracket.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the compact disc changer mounting nuts.

    3. Tighten
    Tighten the compact disc changer retaining nuts to 2 N·m (18 lb in).

  3. Install the console wiring harness connector to the remote compact disc changer.
  4. Install the floor console. Refer to Front Floor Console Replacement in Instrument Panel Gauges, and Console.
  5. Install the negative battery cable.