Caution: Refer to Brake Fluid Irritant Caution in the Preface section.

Notice: Refer to Brake Fluid Effects on Paint and Electrical Components Notice in the Preface section.

1. Remove the air cleaner intake duct.



2. Disconnect the electrical connector from the fluid level sensor.



3. Using a pair of needle nose pliers, compress the locking tabs on the fluid level sensor



4. Remove the brake fluid level sensor from the reservoir.

Important: A snap should be felt or heard when installing the brake fluid level sensor into the reservoir,

1. Install the brake fluid level sensor in the reservoir.



2. Install the electrical connector to the switch.



3. Install the air intake duct.