GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 Blazer - 2WD 🢒 Transmission/Transaxle 🢒 Manual Transmission - NV 1500 🢒 Instrument Panel Compartment Door Replacement

Removal Procedure

    Object Number: 313447 Size: SH
  1. Remove the right side instrument panel sound insulator. Refer to Instrument Panel Insulator Panel Replacement - Right Side .
  2. Push up on the J-spring in order to release the storage compartment door.

    3. Object Number: 392772 Size: SH
  3. Remove the screws that retain the instrument panel compartment door hinges to the instrument panel.
  4. Remove the instrument panel storage compartment door from the instrument panel.

    5. Object Number: 392773 Size: SH
  5. Remove the screws that retain the instrument panel compartment bezel to the instrument panel.
  6. Remove the instrument panel compartment bezel from the instrument panel.
  7. Disconnect the electrical connector from the instrument panel compartment lamp and switch assembly.

Installation Procedure

    Object Number: 392773 Size: SH
  1. Connect the electrical connector to the instrument panel compartment lamp and switch assembly.
  2. Install the storage compartment bezel to the instrument panel.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the screws that retain the instrument panel compartment bezel to the instrument panel.

    4. Tighten
    Tighten the screws to 1.9 N·m (17 lb in).


    Object Number: 392772 Size: SH
  4. Install the instrument panel storage compartment door to the instrument panel.
  5. Install the screws that retain the instrument panel compartment door hinges to the instrument panel.

    6. Tighten
    Tighten the screws to 1.9 N·m (17 lb in).


    Object Number: 313447 Size: SH
  6. Push the storage compartment into place.
  7. Install the right side instrument panel sound insulator. Refer to Instrument Panel Insulator Panel Replacement - Right Side .