Sunroof Switch Replacement CF5

1. Remove the driver information console (DIC). Refer to Driver Information Center Replacement in Instrument Panel, Gages and Console.
2. Disconnect the electrical connector from the driver information display module.



3. Remove 6 screws securing the sunroof switch assembly to the DIC.
4. Remove the sunroof switch assembly from the DIC.

1. Install the sunroof switch to the sunroof console with 6 screws.



2. Connect the electrical connector to the driver information display module.
3. Install the DIC. Refer to Driver Information Center Replacement in Instrument Panel, Gages and Console.

Sunroof Switch Replacement ZRX/XTREME w/CF5

1. With a medium flat-bladed tool, remove the motor/actuator service cover.
2. Remover the motor/actuator trim cover screw (2).



3. Lower the trim cover (5).
4. Remove the switch (4) from the cover.
5. Disconnect the motor/actuator electrical connector (3).



6. Remove the ground screw (3) and ground wire (2) from the header in behind the motor/actuator.
7. Disconnect the main feed electrical connector (1).
8. Remove the sunroof switch from the vehicle.

1. Position the ground wire (2) to the header.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the ground screw (3).

Tighten
Tighten the ground screw to 1.5 N·m (13 lb in).

3. Connect the main feed electrical connector (1).



4. Connect the electrical connector (3).
5. Operate the function of the sunroof switch (4).
6. Install the switch into the motor/actuator trim cover (5).




Important: Ensure the wires are positioned away from the trim cover attachment screw.

7. Position the cover to the sunroof panel window garnish molding (3).
8. Install the motor/actuator trim cover screw (2).

Tighten
Tighten the screw to 1.5 N·m (13 lb in).

9. Install the motor/actuator service cover.