GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 Blazer - 2WD 🢒 Body and Accessories 🢒 Seats 🢒 Rear Seat Back Cushion Cover and Pad Replacement

Removal Procedure
  1. Remove the rear seat from the vehicle. Refer to Rear Seat Replacement .
  2. Remove the rear seat head restraint. Refer to Rear Seat Head Restraint Replacement .
  3. Remove the rear seat back release latch. Refer to Rear Seat Back Release Latch Replacement .

    4. Object Number: 1373776 Size: SH
  4. Release the seat back cover J--strips (1) along the bottom of the rear seat back.
  5. Release the seat back cover hook and loop strips (2) along the bottom sides of the rear seat back.

    6. Object Number: 1373777 Size: SH

    Important: When separating the seat cover hook and loop retaining strips, do not pull the adhesive-backed strip from the pad.

  6. Release the lower hook and loop retaining strips (2) located inside the seat cover (1).
  7. Remove the cover (1) from the rear seat back assembly.
  8. Carefully remove the seat back pad (3) from the rear seat back frame.

Installation Procedure

    Object Number: 1373777 Size: SH
  1. Position the seat back pad (3) to the rear seat back frame.
  2. Install the cover (1) to the rear seat back assembly.
  3. Pull the seat cover down over the seat back pad.
  4. Press the seat cover hook and loop retaining strips (2) together by firmly running your hand over the seat back cover.

    5. Object Number: 1373776 Size: SH
  5. Install the seat back cover J--strips (1) along the bottom of the rear seat back.
  6. Install the seat back cover hook and loop strips (2) along the bottom sides of the rear seat back.
  7. Install the rear seat back release latch. Refer to Rear Seat Back Release Latch Replacement .
  8. Install the rear seat head restraint. Refer to Rear Seat Head Restraint Replacement .
  9. Install the rear seat from the vehicle. Refer to Rear Seat Replacement .