GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 Blazer - 2WD 🢒 Body and Accessories 🢒 Seats 🢒 Rear Seat Head Restraint Cover Replacement

Removal Procedure

    Object Number: 1373784 Size: SH
  1. Raise the head restraint to the full up position by pressing the release tab (2), and by lifting up the head restraint.
  2. Insert a small tool into the head restraint retainer port (4).
  3. In order to release the head restraint retainer, simultaneously lift up on the head restraint while applying inward pressure to the tool in the retainer release port (4).

    4. Object Number: 1373785 Size: SH
  4. Remove the head restraint from the seat assembly.

    5. Object Number: 1373784 Size: SH
  5. Release the J-strips (3) on the bottom of the head restraint.
  6. Remove the cover from the restraint.

Installation Procedure
  1. Install the cover over the restraint.

    2. Object Number: 1373784 Size: SH
  2. Hook the J-strips (3) closed on the bottom of the head restraint.

    3. Object Number: 1373785 Size: SH
  3. Position the head restraint to the seat assembly.
  4. Push the head restraint downward into the fully installed position.
  5. Raise the head restraint to the full up position. Verify that the head restraint retainer prevents the head restraint from being removed from the seat assembly.