For 1990-2009 cars only
Removal Procedure
- Remove the leaf spring from the vehicle. Refer to Leaf Spring Replacement .
- Remove the bushing from the spring assembly. Press the spring bushing from the spring in an arbor press.
- Clean the spring eye of any remaining parts of the bushing.
- Remove any burrs from the spring eye that could cause the new bushing to bind when the bushing is installed.
Installation Procedure
- Apply rubber lubricant to the bushing (1). Apply lubricant to the spring eye (2).
- Install the bushing to the spring assembly. Press the bushing into the spring using an arbor press.
- Install the leaf spring to the vehicle. Refer to Leaf Spring Replacement .
