Tools Required

J 46406 Fan Clutch Wrench

1. Remove the upper fan shroud. Refer to Fan Shroud Replacement .



2. Remove the fan clutch assembly in a counterclockwise direction using the J 46406 .
3. Remove the fan clutch assembly from the vehicle.



4. Remove the fan blade mounting bolts.
5. Remove the fan blade from the fan clutch.

1. Install the fan blade to the fan clutch.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.




2. Install the fan blade mounting bolts.

Tighten
Tighten the bolts to 33 N·m (24 lb ft).




3. Install the fan clutch assembly using the J 46406 .

Tighten
Tighten the fan clutch to 56 N·m (40 lb ft).

4. Install the upper fan shroud. Refer to Fan Shroud Replacement .