GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Blazer - 2WD 🢒 Vehicle Control Systems 🢒 Vehicle DTC Information 🢒 Driver Information Center Module Replacement

Removal Procedure

    Object Number: 299158 Size: SH
  1. Using a flat-bladed tool, carefully remove the display lens (1) from the overhead console (3).
  2. Remove the electronic display module (2) from the console (3).
  3. Disconnect the electrical connection.

Installation Procedure

    Object Number: 299158 Size: SH
  1. Connect the electrical connection.
  2. Install the electronic display module (2) to the overhead console (3).
  3. Install the display lens (1) by snapping the lens into place.
  4. Calibrate the compass. Refer to Electronic Compass Calibration.
  5. Refer to Control Module References for programming and setup information.