Step | Action | Yes | No | ||||||
|---|---|---|---|---|---|---|---|---|---|
Schematic Reference: Exterior Lights Schematics Connector End View Reference: Lighting Systems Connector End Views | |||||||||
1 | Did you review the Exterior Lighting Systems Description and Operation and perform the necessary inspections? | Go to Step 2 | |||||||
2 | Verify that the tail lamps are inoperative. Do the tail lamps operate normally? | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 | ||||||
3 | Inspect the inoperative bulb and socket for the following:
Was a problem found? | Go to Step 9 | Go to Step 4 | ||||||
4 | Inspect LR PARK and RR PARK fuses in underhood fuse block. Are the fuses good? | Go to Step 5 | Go to Step 6 | ||||||
5 | Test for an open or high resistance in the inoperative rear park lamps supply voltage circuit. Refer to Circuit Testing in Wiring Systems. Was a problem found? | Go to Step 7 | Go to Step 8 | ||||||
6 | Repair the short to ground in the inoperative rear park lamps supply voltage circuit. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | Go to Step 10 | -- | ||||||
7 | Repair the open or high resistance in the inoperative rear park lamps supply voltage circuit. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | Go to Step 10 | -- | ||||||
8 | Repair the open or high resistance in the ground circuit. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | Go to Step 10 | -- | ||||||
9 | Replace the inoperative bulb or socket. Is the repair complete? | Go to Step 10 | -- | ||||||
10 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 | ||||||
