GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Blazer - 2WD 🢒 Body 🢒 Body Rear End 🢒 Endgate Lock Cylinder Replacement

Removal Procedure
  1. Remove the endgate window latch support. Refer to Endgate Window Latch Support Replacement .
  2. Disconnect the electrical connectors, as needed.

    3. Object Number: 753 Size: SH
  3. Remove the clip that retains the endgate lock cylinder to the endgate.
  4. Remove the lock cylinder from the endgate.

Installation Procedure

    Object Number: 753 Size: SH
  1. Install the lock cylinder to the endgate.
  2. Install the clip that retains the endgate lock cylinder to the endgate.
  3. Connect the electrical connectors, as needed.
  4. Remove the endgate window latch support. Refer to Endgate Window Latch Support Replacement .