Endgate Handle Replacement Utility

1. Remove the handle grip screws.
2. Remove the liftgate trim panel. Refer to Liftgate Trim Panel Replacement .
3. Release the liftgate handle rod retainer.



4. Remove the bolts that retain the liftgate outside handle to the liftgate.



5. Remove the liftgate outside handle from the liftgate.

1. Install the liftgate outside handle to the liftgate.




Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the bolts that retain the liftgate outside handle to the liftgate.

Tighten
Tighten the bolts to 4 N·m (35 lb in).




3. Install the liftgate handle rod to the liftgate handle.
4. Engage the retainer.
5. Install the liftgate trim panel. Refer to Liftgate Trim Panel Replacement .