Sunroof Window Replacement CF5
Removal Procedure
Important: The sunroof must be in the fully closed position prior to removing the glass
panel.
- Open the sunshade panel.
- Remove the 4 screws (2) that retain the sunroof window (1)
to the sunroof module assembly.
- Remove the sunroof window from the top of the vehicle.
Installation Procedure
- Position the sunroof window (1) to the vehicle.
Notice: Refer to Fastener Notice in the Preface section.
- Install the screws (2) that retain the sunroof window (1) to
the sunroof module assembly.
- Perform the following steps in order to adjust the sunroof window.
3.1. | Adjust the fit between the sunroof window and the roof opening. |
The fit should be equal on both sides.
3.2. | Adjust the rear edge of the window slightly higher than the front edge
in order to minimize wind noise. |
Tighten
Tighten the sunroof window screws to 3 N·m (27 lb in).
- Open and close the sunroof.
- Inspect the fit of the sunroof window.