Step | Action | Yes | No | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Schematic Reference: Exterior Lights Schematics Connector End View Reference: Lighting Systems Connector End Views | |||||||||||||||
1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | Go to Diagnostic System Check - Vehicle in Vehicle DTC Information | ||||||||||||
2 | Verify that the tail, marker, and license lamps are always on. Do the tail, marker, and license lamps operate normally? | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 | ||||||||||||
3 | Disconnect the headlamp switch. Do the tail, marker, and license lamps lamps remain illuminated? | Go to Step 4 | Go to Step 6 | ||||||||||||
4 | Remove the park lamp relay from the body relay block. Do the tail, marker, and license lamps lamps remain illuminated? | Go to Step 5 | Go to Step 7 | ||||||||||||
5 | Repair the short to voltage in one of the following circuits. Refer to Wiring Repairs in Wiring Systems:
Is the repair complete? | Go to Step 8 | -- | ||||||||||||
6 | Replace the headlamp switch. Refer to Headlamp Switch Replacement . Is the repair complete? | Go to Step 8 | -- | ||||||||||||
7 | Replace the park lamp relay. Refer to Relay Replacement in Wiring Systems. Is the repair complete? | Go to Step 8 | -- | ||||||||||||
8 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 | ||||||||||||
