GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Chevrolet
🢒
2005
🢒
Blazer - 2WD
🢒
Body
🢒
Seats
🢒 Driver or Passenger Seat Back Cushion Cover and Pad Replacement
Removal Procedure
Remove the head restraint, if equipped, from the seat back. Refer to
Front Seat Head Restraint Replacement
.
Remove the EZ entry release handle, if equipped, from the seat back. Refer to
EZ Entry Seat Manual Release Knob Replacement
.
Separate the J-strip at the base of the seat back.
Remove the seat cover from the pad by sliding the cover upward off the seat back.
Remove the seat back cardboard by unhooking the plastic clips from the lumber support.
Separate the seat back pad from the seat back frame.
Installation Procedure
Install the seat back pad onto the seat back frame.
Install the seat back cardboard to the seat by hooking the plastic clips onto the lumbar support.
Pull the seat cover over the entire seat back.
Engage the J-strip at the base of the seat back.
Install the head restraint to the seat back. Refer to
Front Seat Head Restraint Replacement
.