Tools Required

1. Remove the Flywheel. Refer to Engine Flywheel Replacement in Engine Mechanical 4.3L.

Caution: Wear safety glasses in order to avoid eye damage.

Notice: When using the J 43276 Clutch Pilot Bearing Remover, always secure the J 43276-1 Clutch Pilot Bearing Remover tool body using a wrench. Do not allow the J 43276-1 tool body to rotate. Failing to do so causes damage to the J 43276-1 tool body.

2. Remove the clutch pilot bearing using the J 43276 .

2.1.	Install the J 43276-1 tool body into the clutch pilot bearing.

2.2.	Using a wrench secure the J 43276-1 tool body.

2.3.	Insert the J 43276-2 forcing screw into the J 43276-1 tool body.

2.4.	Rotate the J 43276-2 forcing screw clockwise into the J 43276-1 tool body until the clutch pilot bearing is completely removed from the crankshaft.

2.5.	Rotate the J 43276-2 forcing screw counterclockwise to remove the J 43276-2 forcing screw from the J 43276-1 tool body.

2.6.	Remove the J 43276-1 tool body from the clutch pilot bearing.

3. Discard the clutch pilot bearing.

Caution: Wear safety glasses in order to avoid eye damage.

1. Install the NEW clutch pilot bearing using the J 26516-A with the J 8092 .
2. Measure to ensure the proper installation depth is obtained.
3. Install the flywheel. Refer to Engine Flywheel Replacement in Engine Mechanical 4.3L.