Removal Procedure
- Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
in General Information.
- Support the transmission with a transmission jack.
- Remove the transmission mount to the transmission support retaining nut.
- Raise the transmission to take the weight off
of the mount.
- Remove the transmission mount to the transmission mounting bolts.
- Raise the transmission just enough to remove the transmission mount.
- Remove the transmission mount from the vehicle.
Installation Procedure
- Install the transmission mount to the vehicle.
Notice: Use the correct fastener in the correct location. Replacement fasteners
must be the correct part number for that application. Fasteners requiring
replacement or fasteners requiring the use of thread locking compound or sealant
are identified in the service procedure. Do not use paints, lubricants, or
corrosion inhibitors on fasteners or fastener joint surfaces unless specified.
These coatings affect fastener torque and joint clamping force and may damage
the fastener. Use the correct tightening sequence and specifications when
installing fasteners in order to avoid damage to parts and systems.
- Install the transmission mount to the transmission mounting bolts.
Tighten
Tighten the bolts to 50 N·m (37 lb ft).
- Lower the transmission.
- Install the transmission mount to the transmission support retaining nut.
Tighten
Tighten the nut to 57 N·m (42 lb ft).
- Remove the transmission jack.
- Lower the vehicle.