For 1990-2009 cars only
Transmission/Transaxle
All Component Locator
All Description and Operation
- Manual First Gear
- Manual Second Gear
- Manual Third Gear
- Neutral - Engine Running
- Overdrive Range, 4-3 Downshift
- Overdrive Range, First Gear
- Overdrive Range, Fourth Gear
- Overdrive Range, Fourth Gear - Torque Converter Clutch Applied
- Overdrive Range, Second Gear
- Overdrive Range, Third Gear
- Park - Engine Running
- Reverse
All Special Tools and Equipment
Cleaning, Inspection, and Adjustment
- Accumulator Housing Disassemble
- Assembly End Play Measurement
- Case Cover/Turbine Shaft Seal Replacement
- Case Extension Install/Final Drive End Play Check
- Case Inspection
- Clutch Air Check
- Control Valve Lower Body Disassemble
- Driven Sprocket Support Assemble
- Final Drive Carrier Inspect
- Final Drive End Play Measurement
- Input Shaft End Play Measurement
- Second Clutch Plates Installation
Disassembly, Overhaul, Repair, and Assembly
- 3rd Clutch Plate Assembly and Reaction Carrier Disassemble
- 4th Band and Third Clutch/Reaction Shell Removal
- 4th Band Installation
- Accumulator Housing Assemble
- Auxiliary Control Valve Body Assembly Installation
- Auxiliary Control Valve Body Cover, Fluid Filter Seal, and Filter Removal
- Axle Seals Replacement
- Case Cover Assembly Installation
- Case Cover Removal
- Case Extension and Scavenge Pipe Removal
- Channel Plate Assemble
- Control Valve Lower Body Assemble
- Control Valve Lower Body Disassemble
- Control Valve Upper Body Assemble
- Control Valve Upper Body Disassemble
- Differential Carrier and Housing Removal
- Differential Carrier Overhaul
- Drive Sprocket Support and Seal Replacement
- Drive/Driven Sprocket and Chain Removal
- Driven Sprocket Support Disassemble
- DriveSprocket, Driven Sprocket, and Drive Link and Assemble
- Final Drive Carrier, Sun and Internal Gear Removal
- Final Drive Carrier/Differential Carrier Install
- Final Drive Internal Gear and Snap Ring Installation
- Fluid Pan, Gasket, and Transfer Oil Pump Inlet Screen Removal
- Forward and Coast Clutch Assembly Overhaul
- Forward and Coast Clutch Installation
- Forward Clutch Plate Assembly and Low and Reverse Band Removal
- Forward Clutch Support Stud Installation
- Fourth Servo Overhaul
- Fourth Servo Removal
- Holding Fixture Installation
- Input Speed Sensor and Wiring Harness Removal
- Low/Reverse Band and Fretting Ring Installation
- Lower Control Valve Body and Internal Mode Switch Installation
- Lower Control Valve Body Assembly Removal
- Lower Controls Assembly Installation
- Manual Link and Wire Harness Connection
- Manual Shift Detent Lever with Manual Shift Shaft Assembly Removal
- Oil Filter and Side Cover Install
- Oil Pump, Upper Control Valve Assembly Removal
- Output Shaft Installation
- Output Shaft Removal
- Park Pawl Removal
- Parking Pawl and Pivot Pin Install
- Pump Assemble
- Pump Disassemble
- Pump Installation
- Reaction Carrier/Shell and Third Clutch Installation
- Reverse Clutch Housing and Second Sprag Assemble
- Reverse Clutch Housing and Second Sprag Disassemble
- Reverse Clutch Housing Installation
- Scavenge Pipe Installation
- Scavenge Screens/Seals, Bottom Pan Installation
- Second Clutch Plates and Reverse Clutch Removal
- Secondary Pump Assemble
- Secondary Pump Disassemble
- Temperature Sensor, Torque Converter Clutch Solenoid Valve, and Pressure Control Solenoid Valve Assemble
- Third Clutch and Reaction Carrier Assemble
- Thrust Bearings Installation
- Torque Converter and Oil Pump Drive Shaft Install
- Torque Converter and Oil Pump Drive Shaft Removal
Mechanical Specifications
Other Specifications
