Changing a Flat Tire. Chevrolet Blazer

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2005 🢒 Blazer - 2WD 🢒 Service and Appearance Care 🢒 Tires 🢒 Changing a Flat Tire

If a tire goes flat, avoid further tire and wheel damage by driving slowly to a level place. Turn on your hazard warning flashers.

Caution: Changing a tire can be dangerous. The vehicle can slip off the jack and roll over or fall on you or other people. You and they could be badly injured or even killed. Find a level place to change your tire. To help prevent the vehicle from moving:

Set the parking brake firmly.

Put an automatic transmission shift lever in PARK (P), or shift a manual transmission to FIRST (1) or REVERSE (R).

Turn off the engine and do not restart while the vehicle is raised.

Do not allow passengers to remain in the vehicle.

Put the wheel blocks at the front and rear of the tire farthest away from the one being changed. That would be the tire on the other side, at the opposite end of the vehicle.

When you have a flat tire, use the following example as a guide to assist you in the placement of wheel blocks.

The following information will tell you next how to use the jack and change a tire.