Transfer Case Shift Control Switch Replacement. Chevrolet Blazer

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2000 🢒 Blazer - 4WD 🢒 Driveline/Axle 🢒 Transfer Case - NVG 236 (Two Speed Automatic) 🢒 Transfer Case Shift Control Switch Replacement

Removal Procedure

Remove the automatic transfer case switch from the instrument panel.

•	Pull the tabs on the rear of the switch in.

•	Pull the switch straight out from the panel.

Remove the electrical connector from the automatic transfer case switch.

Installation Procedure

Install the electrical connector to the automatic transfer case switch.
Install the automatic transfer case switch into the instrument panel.
Ensure the automatic transfer case switch locks into the instrument panel.