Name | Location | Locator View | Connector End View |
---|---|---|---|
Body Control Module (BCM) | Lower rear of the IP, on the heater | Body Control System Component Views in Body Control System | -- |
Body Control Module (BCM) Connector C1 (BRN) (24 Cavities) | Lower rear of the IP, on the heater | Body Control System Component Views in Body Control System | Body Control System Connector End Views in Body Control System |
Brake Fluid Level Switch (325 Series) | On the master cylinder | ||
Brake Pressure Modulator Valve (BPMV) (Part of EBCM) | Part of the EBCM, on the left front fenderwell | ||
Brake Pressure Differential Switch (310 Series) | In center of the combination valve | ||
Data Link Connector (DLC) | Lower left of the IP | Data Link Communications Component Views in Data Link Communications | Data Link Communications Connector End Views in Data Link Communications |
Electronic Brake Control Module (EBCM) (310 Series) | On the brake pressure modulator valve (BPMV), toward the rear of the LF fenderwell | ||
Electronic Brake Control Module (EBCM) (310 Series) Connector C1 (10 Cavities) (BLK) | The body harness connector on the left side of the EBCM | ||
Electronic Brake Control Module (EBCM) (310 Series) Connector C2 (4 Cavities) (BRN) | The SIR body harness connector on the left side of the EBCM | ||
Electronic Brake Control Module (EBCM) (310 Series) Connector C3 (2 Cavities) (BLK) | The body harness connector, left side of the EBCM | ||
Electronic Brake Control Module (EBCM) (325 Series) | On the brake pressure modulator valve (BPMV), toward the rear of the LF fenderwell | ||
Electronic Brake Control Module (EBCM) (325 Series) Connector C1 (16 Cavities) (BLK) | The body harness connector on the left side of the EBCM | ||
Electronic Brake Control Module (EBCM) (325 Series) Connector C2 (2 Cavities) (BLK) | The SIR body harness connector on the left side of the EBCM | ||
Four Wheel Drive Indicator Switch (NP1) | At the front axle, to the right of the differential | Transfer Case Control Component Views in Transfer Case - NVG 233 (NP1) | Transfer Case Control Connector End Views in Transfer Case - NVG 233 (NP1) |
Four Wheel Drive Indicator Switch (NP8) | At the front axle, to the right of the differential | Transfer Case Control Component Views in Transfer Case - NVG 236 (NP8) | Transfer Case Control Connector End Views in Transfer Case - NVG 236 (NP8) |
Instrument Cluster | In the IP, ahead of the steering column | Instrument Panel, Gages, and Console Component Views in Instrument Panel, Gauges and Console | Instrument Panel, Gages, and Console Connector End Views in Instrument Panel, Gauges and Console |
IP Fuse Block | LH of the IP, near the side door jamb switch | Power and Grounding Component Views in Wiring Systems | -- |
Powertrain Control Module (PCM) | On the right side of the engine compartment | Engine Controls Component Views in Engine Controls - 2.2L | -- |
Powertrain Control Module (PCM) Connector C1 (2.2L) | On the right side of the engine compartment | Engine Controls Component Views in Engine Controls - 2.2L | Powertrain Control Module Connector End Views in Engine Controls - 2.2L |
Stop Lamp Switch | Mounted on the brake pedal | Lighting Systems Component Views in Lighting Systems | Lighting Systems Connector End Views in Lighting Systems |
Transfer Case Shift Control Module (NP4) | Behind the RF kick panel, the lower connector | Transfer Case Control Component Views in Transfer Case - NVG 136 (NP4) | -- |
Transfer Case Shift Control Module (NP8) | Behind the RF kick panel, the lower connector | Transfer Case Control Component Views in Transfer Case - NVG 236 (NP8) | -- |
Transfer Case Shift Control Module Connector C1 (32 Cavities) (NP4) | Behind the RF kick panel, the lower connector | Transfer Case Control Component Views in Transfer Case - NVG 136 (NP4) | Transfer Case Control Connector End Views in Transfer Case - NVG 136 (NP4) |
Transfer Case Shift Control Module Connector C1 (32 Cavities) (NP8) | Behind the RF kick panel, the lower connector | Transfer Case Control Component Views in Transfer Case - NVG 236 (NP8) | Transfer Case Control Connector End Views in Transfer Case - NVG 236 (NP8) |
Transfer Case Shift Control Module (NP1) | Behind the RF kick panel | Transfer Case Control Component Views in Transfer Case - NVG 233 (NP1) | Transfer Case Control Connector End Views in Transfer Case - NVG 233 (NP1) |
Underhood Fuse Block | On the top of the left inner wheelwell | Power and Grounding Component Views in Wiring Systems | -- |
Underhood Fuse Block Connector C1 (68 Cavities) (Body) | Below the underhood fuse block | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Underhood Fuse Block Connector C2 (68 Cavities) (Engine) | Below the underhood fuse block | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Underhood Fuse Block Connector C6 (2 Cavities) (Body) | Below the underhood fuse block | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Vehicle Control Module (VCM) (4.3L) | Right side of the engine compartment | Engine Controls Component Views in Engine Controls - 4.3L | -- |
Vehicle Control Module (VCM) (4.3L) Connector C1 (BLU) (32 Cavities) | Right side of the engine compartment | Engine Controls Component Views in Engine Controls - 4.3L | VCM Connector End Views in Engine Controls - 4.3L |
Wheel Speed Sensor, LH | Part of the left wheel knuckle and hub | ||
Wheel Speed Sensor, RH | Part of the right wheel knuckle and hub | ||
C101 (16 Cavities) (2.2L) | Engine harness to body harness, right of the engine compartment, near the PCM | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C101 (10 Cavities) (4.3L) | Engine harness to body harness, right of the engine compartment, near the VCM |
in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C109 (6 Cavities) | Body harness to the 4 WAL/SIR harness near the EBCM | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C114 (2 Cavities) (NP1/NP8) | Body harness to front axle switch extension harness, left center of the engine compartment, near the EBCM | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C203 (116 Cavities) | Body harness to IP harness, to the right of the IP | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
G102 (2.2L) | (CKT 350) At the engine harness, RF of the engine block, under the generator | Harness Routing Views in Wiring Systems | -- |
G102 (4.3L) | (CKT 350) Engine harness, RR of the cylinder head | Harness Routing Views in Wiring Systems | -- |
G105 (2.2L) | (CKT 450, CKT 451) Engine harness, to the RR of the engine block, near the electronic ignition control module | Harness Routing Views in Wiring Systems | -- |
G105 (4.3L) | (CKT 450, CKT 451) Engine harness, LR of the cylinder head | Harness Routing Views in Wiring Systems | -- |
G110 | (CKT 150) Body harness, near the windshield washer pump | Harness Routing Views in Wiring Systems | -- |
P100 | IP bulkhead pass-through, LR of the engine compartment, on the cowl | Harness Routing Views in Wiring Systems | -- |
S138 | (CKT 420) Body harness, between the breakout to VCM connector C4 and the windshield wiper motor breakout, 32 cm (13 in) from the breakout to the motor | Harness Routing Views in Wiring Systems | -- |
S152 (2.2L) | (CKT 351, CKT 413, CKT 451) Engine harness, between the breakouts for the fuel injector connector and the ignition control module, 7 cm (2.8 in) from G105 | Harness Routing Views in Wiring Systems | -- |
S152 (4.3L) | (CKT 351, CKT 413, CKT 451) Engine harness, between the breakouts for the LR and RR engine block grounds, 13 cm (5.1 in) from the breakout to the LR engine grounds | Harness Routing Views in Wiring Systems | -- |
Splice Pack SP201 | Body harness, to the left of the IP, below the IP fuse block, taped to the body harness | Harness Routing Views in Wiring Systems | -- |