Diagnostic System Check 310 ABS
Test Description
The number(s) below refer to the step number(s) on the diagnostic table.
-
Lack of communication may be due to a partial malfunction of the class 2 serial data circuit or due to a total malfunction of the class 2 serial data circuit. The specified procedure will determine the particular condition.
-
Determines if the Electronic Brake Control Module or the Vehicle Control Module have set DTC's which may affect the operation of the Antilock Brake System.
-
The presence of DTC's which begin with "U" indicate some other module is not communicating. The specified procedure will compile all the available information before tests are performed.
Step | Action | Value(s) | Yes | No | ||||||
|---|---|---|---|---|---|---|---|---|---|---|
1 | Install a scan tool. Does the scan tool power up? | -- | Go to Step 2 | Go to Scan Tool Does Not Power Up in Data Link Communications | ||||||
Does the scan tool communicate with the control modules listed above? | -- | Go to Step 3 | Go to Scan Tool Does Not Communicate with Class 2 Device in Data Link Communications | |||||||
With the scan tool, select the display DTCs function for the following control modules:
Does the scan tool display any DTCs for the control modules listed above? | -- | Go to Step 4 | Go to Symptoms | |||||||
Does the scan tool display any DTCs which begin with a "U"? | -- | Go to Scan Tool Does Not Communicate with Class 2 Device in Data Link Communications | Go to Step 5 | |||||||
5 | Does the scan tool display DTC (P0500, P0502, P0503, P0562, P0563, P0601)? | -- | Go to Powertrain On Board Diagnostic (OBD) System Check Powertrain On Board Diagnostic (OBD) System Check Powertrain On Board Diagnostic (OBD) System Check |
Diagnostic System Check 325 ABS
Test Description
-
Lack of communication may be due to a partial malfunction of the class 2 serial data circuit or due to a total malfunction of the class 2 serial data circuit. The specified procedure will determine the particular condition.
-
Determines if the Electronic Brake Control Module or the Vehicle Control Module have set DTC's which may affect the operation of the Antilock Brake System.
-
The presence of DTC's which begin with "U" indicate some other module is not communicating. The specified procedure will compile all the available information before tests are performed.
Step | Action | Value(s) | Yes | No | ||||||
|---|---|---|---|---|---|---|---|---|---|---|
1 | Install a scan tool. Does the scan tool power up? | -- | Go to Step 2 | Go to Scan Tool Does Not Power Up in Data Link Communications | ||||||
Does the scan tool communicate with the control modules listed above? | -- | Go to Step 3 | Go to Scan Tool Does Not Communicate with Class 2 Device in Data Link Communications | |||||||
With the scan tool, select the display DTCs function for the following control modules.
Does the scan tool display any DTCs for the control modules listed above? | -- | Go to Step 4 | Go to Symptoms | |||||||
Does the scan tool display any DTCs which begin with a "U"? | -- | Go to Scan Tool Does Not Communicate with Class 2 Device in Data Link Communications | Go to Step 5 | |||||||
5 | Does the scan tool display DTC (P0500, P0502, P0503, P0562, P0563, P0601)? | -- | Go to Powertrain On Board Diagnostic (OBD) System Check Powertrain On Board Diagnostic (OBD) System Check Powertrain On Board Diagnostic (OBD) System Check |
