Retained Accessory Power (RAP) Circuit Description. Chevrolet Blazer

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2000 🢒 Blazer - 4WD 🢒 Body and Accessories 🢒 Retained Accessory Power 🢒 Retained Accessory Power (RAP) Circuit Description

The retained accessory power (RAP) feature allows you to operate the following components after the ignition and start switch is turned from the RUN position to the LOCK position:

•	The power windows

•	The sunroof (utility only)

•	The driver information center (utility only)

•	The entertainment system

•	The power folding mirrors (Envoy only)

The BCM monitors the following components:

•	The ignition and start switch position

•	The door jamb switches

•	The voltage on CKT 755

The BCM commands the RAP relay to turn ON by grounding CKT 755. This action is completed when all of the doors are closed and the ignition and start switch is turned to the OFF position. Once the RAP relay is energized, the accessories remain operational until any one of the following conditions exists:

•	The 20 minute timer elapses.

•	The driver/passenger door is opened.

•	The door handle switch is activated.

•	The ignition and start switch is activated.

•	The lift glass jamb switch is activated (utility only).