GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 Blazer - 4WD 🢒 Body and Accessories 🢒 Seats 🢒 Rear Seat Back Cushion Latch Replacement

Removal Procedure

    Object Number: 1373789 Size: SH
  1. Remove the screws (1) that retains the rear seat release latch (2) to the rear seat back.

    2. Object Number: 1373790 Size: SH
  2. Remove the cable (2) from the slot (1) on the rear seat release latch.
  3. Remove the rear seat release latch.

Installation Procedure
  1. Position the rear seat release latch on the seat back.

    2. Object Number: 1373790 Size: SH
  2. Install the cable (2) in the slot (1) on the rear seat release latch.

    3. Object Number: 1373789 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the rear seat release latch (2) to the seat back with the 2 mounting screws (1).

    4. Tighten
    Tighten the rear seat back release latch screws to 2 N·m (18 lb in).