The New Venture Gear NV3500
(85 mm) is a five speed manual transmission used on light duty truck with
4.3L, 5.0L, and 5.7L engines. This manual transmission is identified by
the RPO's M50 and MG5. The reason for 2 different RPO codes is because
of the different first speed gear ratios that the transmission can contain.
The shift assembly design inside the transmission for NV3500 installed
on C/K (GMT400 and GMT 800) trucks are different from that of NV3500
transmissions that are installed in smaller S/T trucks. The 85 mm is
the distance between the input shaft and the counter shaft. The transmission
is available in rear wheel and 4WD versions. The NV3500 transmission
is built in Muncie, Indiana by New Venture Gear, (a division of New Process
Gear) for General Motors Powertrain.
The transmission has the following features:
| • | Constant mesh helical gearing for reduced noise |
| • | A 2 piece aluminum housing |
| • | Synchronized shifting in all forward gears |
| • | A shift tower mounted shift lever |
| • | Single rail shift system |
The New Venture Gear NV 3500 is a 5 speed manual transmission
used on light duty trucks with the 4.3L engine. The NV 3500 is
identified by RPO M50 and RPO MG5. The difference between
the RPO codes is the first speed gear ratios that the transmission has.
The shift assembly design inside the NV 3500 transmission installed
on C/K trucks is different than the NV 3500 transmissions
installed in smaller S/T trucks. The distance between the input
shaft and the countershaft is 85 mm (0.132 in). The transmission
is available in rear wheel drive and four wheel drive.
The transmission has the following features:
| • | Constant mesh helical gearing for reduced noise |
| • | A 2 piece aluminum housing |
| • | Synchronized shifting in all gears |
| • | A shift tower mounted shift lever |
| • | A single rail shift system |
| • | A vehicle speed sensor (VSS) |
