Step | Action | Value(s) | Yes | No | ||||
|---|---|---|---|---|---|---|---|---|
1 | Did you review the Rear Wiper/Washer System Description and Operation? | -- | Go to Step 2 | |||||
2 |
Does the test lamp illuminate? | -- | Go to Step 5 | Go to Step 3 | ||||
3 | Inspect for an open RR WPR/WSHR fuse. Did you find and correct the condition? | -- | Go to Step 16 | Go to Step 4 | ||||
4 | Repair the open in the rear window wiper motor control circuit. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | Go to Step 16 | -- | ||||
5 |
Does the test lamp illuminate? | -- | Go to Step 8 | Go to Step 6 | ||||
6 | Inspect for a poor connection at the rear wiper/washer switch connector. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 16 | Go to Step 7 | ||||
7 | Replace the rear wiper/washer switch. Refer to Windshield Wiper and Washer Switch Replacement . Did you complete the repair? | -- | Go to Step 16 | -- | ||||
8 | Probe from the rear wiper motor connector, terminal D, to ground with a test lamp. Does the test lamp illuminate? | -- | Go to Step 10 | Go to Step 9 | ||||
9 | Repair the open in the rear window wiper switch signal circuit. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | Go to Step 16 | -- | ||||
10 | Probe from the rear wiper motor connector, terminal E, to ground with a test lamp. Does the test lamp illuminate? | -- | Go to Step 12 | Go to Step 11 | ||||
11 | Repair the open in rear window wiper control circuit. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | Go to Step 16 | -- | ||||
12 | Probe from the rear wiper motor connector, terminal A to terminal E, with a test lamp. Does the test lamp illuminate? | -- | Go to Step 14 | Go to Step 13 | ||||
13 | Repair the open in the ground circuit. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | Go to Step 16 | -- | ||||
14 | Inspect for a poor connection at the rear wiper motor. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 16 | Go to Step 15 | ||||
15 | Replace the rear wiper motor. Refer to Rear Window Wiper Motor Replacement . Did you complete the replacement? | -- | Go to Step 16 | -- | ||||
16 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 2 |
