Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you review the Wiper/Washer System Description and Operation and perform the necessary inspections? | -- | Go to Step 2 | |
2 |
Is the test light on? | -- | Go to Step 3 | Go to Step 4 |
3 | Backprobe the from rear wiper motor connector, terminal B, to ground using a J 35616-200 . Is the test light on? | -- | Go to Step 5 | Go to Step 6 |
4 | Replace the rear wiper/washer switch. Is the replacement complete? | -- | Go to Step 7 | -- |
5 | Replace the rear wiper motor. Refer to Rear Window Wiper Motor Replacement . Is the replacement complete? | -- | Go to Step 7 | -- |
6 | Repair the poor connection or the high resistance in CKT 391, 393 or the rear window wiper cutout switch. Is the repair complete? | -- | Go to Step 7 | -- |
7 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK |
