| Table 1: | Body Control Module (BCM) |
| Table 2: | Instrument Panel Cluster (IPC) |
| Table 3: | Powertrain Control Module (PCM) |
The scan tool data lists contain all the instrument panel, gages, and console related parameters that are available on the scan tool. The parameters in the list are arranged in alphabetical order. The data list column indicates the location of the parameter within the scan tool menu selections.
Use the scan tool data lists as directed by a diagnostic table or in order to supplement the diagnostic procedures. Begin all of the diagnostic procedures with Diagnostic System Check - Instrument Cluster , Diagnostic System Check - Driver Information Systems , or Diagnostic System Check - Audible Warnings .
Use the scan tool data lists only after the following is determined:
| • | There is no published DTC procedure nor published symptom procedure for the customer concern. |
| • | The DTC or symptom procedure indicated by the diagnostic system check does not resolve the customer concern. |
The typical data values are obtained from a properly operating vehicle under the conditions specified in the first row of the scan tool data list table. Comparison of the parameter values from the suspect vehicle with the typical data values may reveal the source of the customer concern.
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Ignition ON/Engine OFF/High Beams Off/Doors Closed/Trunk Closed/Park Brake Unapplied | |||
Battery Voltage | Data | Volts | 12.5 V (varies) |
Driver Door Jamb Sw | Input 1 | Active/Inactive | Inactive |
Ignition 1 | Input 1 | Active/Inactive | Active |
Ignition 3 | Input 1 | Active/Inactive | Active |
Key in Ignition | Input 1 | Yes/No | Yes |
Left Turn Signal | Input 2 | On/Off | Off |
Park Brake Switch | Input 1 | Set/Released | Released |
Park Lamps | Input 2 | On/Off | Off |
Right Turn Signal | Input 2 | On/Off | Off |
Security Lamp State | Security Data | On/Off/Flashing | Off |
Vehicle Speed | Data | km/h (mph) | 0 km/h (0 mph) |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Ignition ON/Engine OFF/Seat Belt Buckled/High Beams Off/Park Brake Unapplied | |||
4WD | Outputs | On/Off | Off |
ABS Lamp | Outputs | On/Off | Off |
Battery | Outputs | On/Off | On |
Battery Voltage | Data | Voltage | Varies |
Brake Lamp | Outputs | On/Off | Off |
Cargo Lamp On | Outputs | On/Off | Off |
Change Engine Oil | Outputs | On/Off | Off |
Check Coolant Temp | Outputs | On/Off | Off |
Check Engine Oil Level | Outputs | On/Off | Off |
Check Engine Temp | Outputs | On/Off | Off |
Cruise Control | Outputs | On/Off | Off |
Dimming | Inputs | Active/Inactive | Inactive |
Displayed Coolant Temp | Data | Celsius (Fahrenheit) | 87°C (190°F) |
Displayed Fuel Level | Data | Percent | 0-100% (Varies) |
Displayed Odometer | Data | Kilometers (Miles) | Varies with the mileage of vehicle |
Displayed Trip Odometer | Data | Kilometers (Miles) | Varies with the mileage of vehicle |
Engine Speed | Data | RPM | 0 RPM |
Fasten Seat Belts | Outputs | On/Off | Off |
High Beam Lamp | Outputs | On/Off | Off |
Low Coolant | Outputs | On/Off | Off |
Low Fuel Lamp | Outputs | On/Off | Off |
Low Washer Fluid | Outputs | On/Off | Off |
Module Part Number | Module Information | Numeric | Varies |
Monitored Coolant Temp | Data | Celsius (Fahrenheit) | 82-93°C (180-200°F) |
Monitored Fuel Level | Data | Percent | 0-100% (Varies) |
Oil Pressure Lamp | Outputs | On/Off | Off |
Overspeed Lamp | Outputs | On/Off | Off |
Park Switch | Inputs | Open/Closed | Closed |
PRNDL State | Inputs | Park/ Reverse/ Neutral/ First/ Second/ Third/ Drive | Park |
Reduced Engine Power | Outputs | Active/Inactive | Inactive |
Security Lamp | Outputs | On/Off | Off |
Service 4WD | Outputs | On/Off | Off |
Tow/Haul | Outputs | On/Off | Off |
Trans. Fluid Hot | Outputs | On/Off | Off |
Trans. Hot...Idle Engine | Outputs | On/Off | Off |
Trip Reset Switch | Inputs | Active/Inactive | Inactive |
Upshift Lamp | Outputs | On/Off | Off |
Vehicle Speed | Data | km/h (mph) | 0 km/h (0 mph) |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Engine Idling/Normal Operating Temperature | |||
Cruise Control Active | Engine Data 1 Engine Data 2 Engine Data 3 | Yes/No | No |
ECT Sensor | Engine Data 1 Engine Data 2 Engine Data 3 EGR Data Enhanced EVAP Data Fuel Trim Data H02S Data Misfire Data | Celsius (Fahrenheit) | 85-105°C (185-220°F) |
Engine Oil Life Remaining | Engine Data 3 | Percent | 0-100% |
Engine Oil Pressure Sensor | Engine Data 2 | Volts | 0-5 Volts (Varies) |
Engine Speed | Engine Data 1 Engine Data 2 Engine Data 3 Enhanced EVAP Data Fuel Trim Data H02S Data Misfire Data | RPM | ±100 RPM from desired idle speed |
Fuel Level Sensor | Engine Data 1 EGR Data Enhanced EVAP Data | Volts | 0-5 Volts (Varies) |
Fuel Tank Level Remaining | Enhanced EVAP Data | Percent | 0-100% (varies) |
Fuel Tank Level Remaining | Enhanced EVAP Data | liters (gallons) | 0-70 liters (varies) |
Ignition 1 Signal | Engine Data 1 Engine Data 2 Engine Data 3 Enhanced EVAP Data Fuel Trim Data | Volts | 9-16 V (varies) |
MIL (Malfunction Indicator Lamp) Command | Engine Data 1 | On/Off | Off |
Vehicle Speed Sensor | Engine Data 1 Engine Data 2 Engine Data 3 Enhanced EVAP Data Fuel Trim Data H02S Data | km/h (mph) | 0 km/h (0 mph) |
