| Subject: | Revised Rear Rotor Minimum Allowable Thickness After Refinish
Specification |
| Models: | 2001-2004 Chevrolet S-10 Pickup (4WD Only) |
| 2001-2005
Chevrolet Blazer |
| 2001 GMC Envoy (4WD Only) |
| 2001-2004 GMC Sonoma (4WD Only) |
| 2001 Isuzu Ascender (4WD Only) |
This bulletin is being issued to revise the rear rotor minimum allowable thickness
specification in the Disc Brakes sub-section of the Service Manual. Please replace
the current information in the Service Manual with the following information.
The following information has been updated within SI. If you are using a paper
version of this Service Manual, please make a reference to this bulletin on the affected
page.
The rear rotor minimum allowable thickness after refinish is 19.00 mm
(0.748 in).
