GM Service Manual Online
For 1990-2009 cars only

Water Pump Replacement 4.3L

Removal Procedure

  1. Drain the cooling system. Refer to Cooling System Draining and Filling .
  2. Loosen the water pump pulley bolts.
  3. Remove the cooling fan and clutch assembly. Refer to Fan Clutch Replacement .
  4. Remove the drive belt. Refer to Drive Belt Replacement in Engine Mechanical - 4.3L.

  5. Object Number: 42879  Size: SH
  6. Remove the water pump pulley mounting bolts.
  7. Remove the water pump pulley.

  8. Object Number: 714208  Size: SH
  9. Remove the radiator outlet hose clamp from the water pump.
  10. Remove radiator outlet hose from the water pump.

  11. Object Number: 42880  Size: SH
  12. Remove the water pump mounting bolts.

  13. Object Number: 42882  Size: SH
  14. Remove the water pump from the engine.

  15. Object Number: 42884  Size: SH
  16. Remove the water pump gaskets.
  17. Clean the water pump gasket mating surfaces.

Installation Procedure


    Object Number: 42884  Size: SH
  1. Install the water pump gaskets.

  2. Object Number: 42882  Size: SH
  3. Install the water pump to the engine.
  4. Apply a sealer (GM P/N 12346004) to the bolt threads.

  5. Object Number: 42880  Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  6. Install the water pump mounting bolts.
  7. Tighten
    Tighten the mounting bolts to 41 N·m (30 lb ft).


    Object Number: 714208  Size: SH
  8. Install the radiator outlet hose to the water pump.

  9. Object Number: 42879  Size: SH
  10. Install the water pump pulley.
  11. Install the water pump pulley bolts.
  12. Tighten
    Tighten the water pump pulley bolts to 25 N·m (18 lb ft).

  13. Install the drive belt. Refer to Drive Belt Replacement in Engine Mechanical - 4.3L.
  14. Install the fan clutch assembly. Refer to Fan Clutch Replacement .
  15. Fill the radiator cooling system. Refer to Cooling System Draining and Filling .
  16. Inspect the cooling system for leaks.