GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the transmission. Refer to Transmission Replacement in Manual Transmission - NV 3500.

  2. Object Number: 395628  Size: SH
  3. Remove the 2 bolts securing the concentric actuator cylinder to the clutch housing.
  4. Remove the actuator cylinder from the transmission input shaft.
  5. If required, the bearing can be removed from the actuator cylinder for replacement.

Installation Procedure


    Object Number: 395628  Size: SH
  1. Position the actuator cylinder to the transmission input shaft.
  2. Ensure that the bleed screw and the coupling are positioned toward the transmission ports.

    Notice: Refer to Fastener Notice in the Preface section.

  3. Secure the concentric actuator cylinder to the clutch housing with 2 bolts.
  4. Tighten
    Tighten the bolts to 8 N·m (71 lb in).

  5. Install the transmission. Refer to Transmission Replacement in Manual Transmission - NV3500.