Oil Filter Adapter Replacement for Chevrolet Blazer - 4WD - RHD 2000

1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
2. Position a suitable container to catch the engine oil.
3. Disconnect the engine oil cooler pipes from the oil filter adapter. Refer to Engine Oil Cooler Hose/Pipe Replacement in Engine Cooling.
4. Remove the oil filter adapter. Refer to Oil Filter Adapter Removal .
5. Clean all sealing surfaces.

1. Install the oil filter adapter. Refer to Oil Filter Adapter Installation .
2. Connect the engine oil cooler pipes to the oil filter adapter. Refer to Engine Oil Cooler Hose/Pipe Replacement in Engine Cooling.
3. Lower the vehicle.
4. Operate the engine and inspect for oil leaks.
5. Inspect the engine oil level and add oil if necessary.