For 1990-2009 cars only
Removal Procedure
- Drain the coolant from the radiator. Refer to Cooling System Draining and Filling .
- Disconnect the coolant recovery reservoir hose.
- Remove the radiator hose clamps.
- Disconnect the upper radiator hose from the radiator.
- Remove the upper fan shroud. Refer to Fan Shroud Replacement .
- Disconnect the radiator hoses from the radiator.
- Disconnect the engine oil cooler lines from the radiator, if equipped. Refer to Engine Oil Cooler Hose/Pipe Replacement .
- Disconnect the transmission oil cooler lines from the radiator, if equipped. Refer to Engine Oil Cooler Hose/Pipe Replacement .
- Lift the lower fan shroud just enough to disengage the locating tabs.
- Remove the radiator by lifting the radiator up and out of the vehicle.
- Inspect all sealing surfaces for deterioration or signs of leakage.
Installation Procedure
- Place the lower fan shroud in position under the cooling fan. Refer to Fan Shroud Replacement .
- Install the radiator onto the rubber mounts in the vehicle.
- Connect the engine oil cooler line to the radiator, if equipped. Refer to Engine Oil Cooler Hose/Pipe Replacement .
- Connect the transmission oil cooler lines to the radiator, if equipped. Refer to Engine Oil Cooler Hose/Pipe Replacement .
- Connect the radiator hoses to the radiator.
- Fasten the upper fan shroud to the lower fan shroud. Refer to Fan Shroud Replacement .
- Connect the coolant recovery reservoir hose to the radiator.
- Fill the radiator with the specified coolant and concentration. Refer to Cooling System Draining and Filling .
- Inspect the cooling system for leaks.
