For 1990-2009 cars only
Important: Before adjusting the caster angle and camber angle, raise and release the front bumper. Do this twice in order to allow the vehicle to return to a normal height. Refer to Wheel Alignment Specifications .
Use the cams on the upper control arm frame attaching bolts to adjust the caster and the camber.
To adjust the caster and the camber, loosen the upper control arm-to-frame attaching nuts. Rotate the cam by rotating the bolt head.
| • | Caster - To increase positive caster, move the front cam lobe inboard and move the rear cam lobe outboard. |
| • | Camber - To increase positive camber, move the front and the rear cam lobes inboard. |
Tighten the nuts after you select the proper cam position. Refer to Fastener Tightening Specifications .
