Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

Tighten
Tighten the spare tire carrier mounting bolts to 30 N·m (22 lb ft).

Tighten
Tighten the spare tire to the spare tire carrier mounting nuts to 100 N·m (74 lb ft).

Important: Close the carrier assembly firmly enough to engage both latches, or the spare tire carrier will rattle when the vehicle is in motion.