Front Disc Brake Hardware Replacement Dual Piston

Caution: Refer to Brake Dust Caution in the Preface section.

Caution: Refer to Brake Fluid Irritant Caution in the Preface section.

1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General information.
2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
3. Remove the front brake caliper. Refer to Front Brake Caliper Replacement .



4. Remove the front brake pads. Refer to Front Disc Brake Pads Replacement .
5. Remove the brake pad wear sensors.



6. Remove the bushings from the mounting bracket.
7. Lightly brush all brake pad contact areas.

1. Clean area using denatured alcohol.
2. Dry area using non-lubrcated, filtered air.
3. Apply high temperature silicone brake lubricant to the brake caliper pin bolts. DO NOT apply lubricant to the brake pad hardware.



4. Install the bushings to the mounting bracket.



5. Install the brake pad wear sensors.
6. Install the brake pads.



7. Install the front brake caliper. Refer to Front Brake Caliper Replacement .
8. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
9. Lower the vehicle. Refer to Lifting and Jacking the Vehicle in General information.
10. With the engine running, firmly pump the brake pedal three times.