GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 Blazer - 4WD - RHD 🢒 Brakes 🢒 Park Brake 🢒 Parking Brake Lever Replacement

Removal Procedure

    Object Number: 365522 Size: SH
  1. Release the park brake.
  2. Remove the floor console. Refer to Front Floor Console Replacement in Instrument Panel, Gauges and Console.
  3. Remove nut retaining the park brake cable to the lever assembly.
  4. Disconnect the park brake cable from the park brake lever.
  5. Disconnect the electrical connector from the park brake lever.
  6. Remove the nuts retaining the park brake lever to the floor console bracket.
  7. Remove the park brake lever from the vehicle.

Installation Procedure

    Object Number: 365522 Size: SH
  1. Install the park brake lever to the vehicle.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the nuts retaining the park brake lever to the floor console bracket.

    3. Tighten
    Tighten the park brake lever mounting nuts to 25 N·m (18 lb ft).

  3. Connect the electrical connector to the park brake lever.
  4. Connect the park brake cable to the park brake lever.
  5. Tighten the nut retaining the park brake cable to the park brake lever until there is no free movement between the cable and the lever.
  6. Install the floor console. Refer to Front Floor Console Replacement in Instrument Panel, Gauges and Console.
  7. Adjust the park brake cable. Refer to Park Brake Adjustment .