Tools Required

J 36511 Oil Fill and Drain Plug Hex Bit-17 mm

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.



2. Using J 36511 remove the oil fill and drain plugs. Drain the oil in a suitable container.

1. Apply sealant to the oil drain plug threads. Use sealant GM P/N 12346004 or the equivalent.

Notice: Refer to Fastener Notice in the Preface section.




2. Using J 36511 install the oil drain plug.

Tighten
Tighten the oil drain plug to 30 N·m (22 lb ft).




3. Fill the transmission to the level of the fill plug hole. Refer to Lubrication Specifications .



4. Apply sealant to the oil fill plug threads. Use sealant GM P/N 12346004 or the equivalent.



5. UsingJ 36511 install the oil fill plug.

Tighten
Tighten the oil fill plug to 30 N·m (22 lb ft).

6. Lower the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.