GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 Blazer - 4WD - RHD 🢒 Restraints 🢒 Seat Belts 🢒 Rear Seat Belt Buckle Replacement

Removal Procedure
  1. Fold the rear seats forward.

    2. Lift the rear seat floor filler trim panels to access the rear seat belt buckle assembly.


    Object Number: 156645 Size: SH
  2. Remove the rear seat belt buckle assembly retaining nuts.
  3. Remove the rear seat belt buckle assembly from the vehicle.

Installation Procedure

    Object Number: 156645 Size: SH
  1. Install the rear seat belt buckle assembly to the vehicle.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the rear seat belt buckle assembly retaining nuts.

    3. Tighten
    Tighten the rear seat belt buckle assembly retaining nuts to 42 N·m (31 lb ft).