The air temperature actuator is located on top of the heater case.

1. Roll back the instrument panel. Refer to Instrument Panel Carrier Replacement in Instrument Panel, Gages and Console.
2. Disconnect the electrical connector from the air temperature actuator.
3. Remove the air temperature actuator retaining screws.
4. Remove the air temperature actuator.

1. Install the air temperature actuator.
2. Install the air temperature actuator retaining screws.
3. Install the electrical connector to the air temperature actuator.
4. Install the instrument panel carrier. Refer to Instrument Panel Carrier Replacement in Instrument Panel, Gages and Console.