GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 Blazer - 4WD - RHD 🢒 Body and Accessories 🢒 Lighting Systems 🢒 Front Parking and Turn Signal and Fog Lamp Assembly Replacement

Removal Procedure
  1. Make sure the front foglamp switch is in the OFF position and the ignition switch is in the LOCK position.
  2. Remove the headlamp assembly from the vehicle. Refer to Headlamp Replacement .
  3. Remove the grille from the vehicle. Refer to Air Inlet Grille Panel Replacement in Body Front End.

    4. Object Number: 364475 Size: SH

    Important: Squeeze together the retainer at the back of the turn signal lamp assembly to release it from the grille.

  4. Remove the turn signal lamp assembly with the front foglamp from the grille.
  5. Remove the front foglamp adjustment screw.
  6. Remove the front foglamp from the turn signal lamp assembly.
  7. Remove the bulb from the front foglamp base.

Installation Procedure

    Object Number: 364475 Size: SH
  1. Install the bulb to the front foglamp base.
  2. Install the front foglamp to the turn signal lamp assembly.
  3. Install the front foglamp adjustment screw.
  4. Install the turn signal lamp assembly with the front foglamp to the grille.
  5. Install the grille to the vehicle. Refer to Air Inlet Grille Panel Replacement in Body Front End.
  6. Install the headlamp assembly to the vehicle. Refer to Headlamp Replacement .
  7. Adjust the front foglamp. Refer to Fog Lamp Aiming .