Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Fog Lights Schematics | |||
1 | Did you perform the Lighting Systems Diagnostic System Check? | Go to Step 2 | |
2 | Verify that the fog lamp indicator is always on. Does the fog lamp indicator operate normally? | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 | Are the fog lamps always on? | Go to Step 4 | |
4 | Test the fog lamp switch ground circuit for an open or high resistance. Refer to Circuit Testing in Wiring Systems. Was a problem found? | Go to Step 5 | Go to Step 6 |
5 | Repair the open or high resistance in the fog lamp switch ground circuit. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | Go to Step 7 | -- |
6 | Replace the fog lamp switch. Refer to Fog Lamp Switch Replacement or Rear Fog Lamp Switch Replacement . Did you complete the repair? | Go to Step 7 | -- |
7 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
